Featured

Truck or Treat Halloween Party

Come enjoy a night of Spooky Fun with your C/10 Club Utah family at our Truck or Treat Halloween Party on October 27, 2023 from 6-9 pm. There will be plenty of ghoulish fun, games, and candy for your little monsters! We will have a costume contest with prizes for best dressed adult, best dressed child, and our sponsor @tuckersclassicautoparts has donated a $100 dollar gift card for the best dressed truck! There will also be a prize for the best recipe in our first annual C/10 Club Utah Chili Cook-Off! Prepare your favorite recipe before the show and bring it out to share, and be judged by your C/10 Club Utah family. The show will be held in the parking lot of Siegfried & Jensen located at 5664 South Green Street in Murray, Utah and our friends from Rockin Hot Rod Productions will provide the sound! Please bring a few bags of candy so the little ones can Trick or Treat from the tailgates of our trucks. This is a Classic GM Truck show for Trucks, Suvs, and Panel Vans years 1919-1998, but we will open the doors to other classic GM vehicles for this one as well. The first 50 vehicles in attendance will receive a very exclusive C/10 Club Utah Halloween ’23 sticker, so get your costume on, dress up that truck, and get there before our exhaust pipes wake the dead!

Exclusive Sticker Available for the First 50 Trucks
#c10 #c10trucks #c10nation #squarebody #c10club #c10clubutah #c10talk #c10crew #squarebodynation #chevyc10 #squarebodysyndicate #squarebodychevy #k10 #c30 #c10era #c10chevy #c10truck #c10life #c10vatos #c10lifestyle #chevytrucks #squarebody_usa #chevytruck #c10clubworldwide #c10mafia #chevy #halloween #halloweencostume #halloweenmakeup #halloweenparty

C/10 Club Utah Summer Party and Cruise Recap

The weather Gods finally shined on C/10 Club Utah and gave us perfect weather for our Summer Party and Cruise. Trucks came from as far north as Wyoming, and Utah County from the south. We had three stops where we added more and more trucks along the way, then moseyed up beautiful South Weber Canyon together. The Smokin Boxcar BBQ restaurant hosted the party and their pulled pork, brisket, and salads were enjoyed by all. Check out the photo gallery below of some of the trucks that made it out for the party.

C/10 Club Utah Lakeside Cruise

Come take a nice Lakeside Cruise with your C/10 Club Utah family on June 03, 2023! 🛻Northern Utah and Salt Lake County family will meet up at Starbucks on 5500 South Redwood Road in Taylorsville at 8:00 am and roll out at 8:30 am. Utah County family will meet at Dutch Bros Coffee on 963 North Redwood Road in Saratoga Springs at 8:30 am, and join the northern crew. At 9 am we will all head out together and take a leisurely stroll along the backside of Utah Lake and enjoy the beautiful scenery. We will make a stop in Elberta at the famous Sinclair gas station for some club photo opportunities, which we will use for the cover of our 2024 calendar. Make sure to get this one on the calendar and be sure not to miss the family photo! 📸
.⁣
.⁣
.⁣
.⁣
.⁣

c10 #c10club #onechapteroneclub #c10clubutah #c10nation #c10trucks #dinosgitdown #cruisin #lakesidecruise2023

Kickoff Meet and Meat Recap

We had a great turnout this last Saturday for our inaugural event. Our C/10 Club Utah Meet and Meat BBQ at Murray Park was a great success with nearly 30 trucks and lots of good people. C/10 Club Utah prepared and served up 75 pounds of pulled pork, as well as hot dogs, chips, sodas, and cake. Club members also heavily supported the event by bringing a wide variety of salads and deserts.

Thank you to everyone who supported the event and brought out their awesome trucks. It was a wonderful time making new friends and C/10 Club Family. In the end we had just what C/10 Club is all about, GOOD PEOPLE, COOL TRUCKS, and GREAT TIMES!

Our next event will be our Cinco de Mayo party which will take place on Friday, May 05, 2023 from 6-9 PM at Jurassic Tacos in West Jordan, Utah! This Cruise-In event will be a fun party with some of the best tacos around. Jurassic Tacos was recently featured on Netflix, and you won’t want to miss their Al Pastor or their Carne Asada Tacos. We hope to see you all three with your Chevy trucks!

Featured C/10 of the Week!🔥🔥03/25/2023

Our featured truck of the week from Stansbury Park, Utah is C/10 Club Utah member, Ryan Ashley’s ‘66 C10, “Goldie”. Originally built by club member Kevin Poulson from Northern, Utah, Goldie rocks a 5.3 LS Carbureted motor with Detroit Speed Cam backed by a 700R4 transmission. This truck is still sporting it’s original paint and is an all natural patina beauty. 🔥🔥🔥
.⁣
.⁣
.⁣
.⁣
.⁣

#c10 #c10club #onechapteroneclub #c10clubutah #c10nation #c10talk #c10trucks #chevytrucks #dinosgitdown #classictrucks #customtrucks #dropped #c10clubutah #gm #gmc #k5blazer #lowered #obs #damnson #protouring #shortbed #silverado #squarebodynation #stance #truck #trucklife #trucknation #truckporn #trucks #trucksdaily #trucksofinstagram

Featured C/10 of the Week 3/19/23

Our featured truck of the week is C/10 Club Utah member Charles Ledbetter’s @xchuckx801 radical ‘70 C/10! 🔥🔥 Charles is an EMT here in Salt Lake, and was on the front lines during Covid. Nationally, C/10 Club @c10club recognizes First Responders and have created a special sticker to honor them. (See it below)

We will be presenting Charles with his at our Kickoff Meet and Meat on April 1, 2023 at Murray Park! Read more about all that Charles has done to his truck on our website, Link in Bio. Beautiful work on your truck Charles, and Thank you for all you do in our community! 🙏🙏

Here’s what Charles had to say about his truck:

1970 C10 Long bed. Yes a long bed!! When you get a project you will never know if you will put a few hundred or a few thousand dollars into it. It just explodes with your creation and vision and then you end up with what you have. 

Sometimes you build with what you have and others seem to have opinions about it negatively. At the end of the day you created your best dream with what you have in your hands. And to me that’s better then anything else in the world rather it be a few hundred dollar build or a 1 million dollar build. Effort and time for this hobby and love of trucks is what brings us together. Not trends and displays of money. I rather be friends with a guy who has a old rusted truck then a guy who has a truck that won’t drive to the car show himself. 

5.3 LS 76mm single turbo. Stage 2 truck turbo cam. Ls3 blue springs. Titanium valves 94mm throttle body. AEM high pressure fuel system to 70lb injectors. 

MSD ignition system

All controlled by Holley terminator x max system. 

Can run from 5psi to 10psi 

With ranges from 450whp to just under 700. 

Suspension 

Beltech 3 inch drop spindle with 2 inch drop springs 

Nitrogen quick damper shocks 

1.5 inch sway bar with new bushings. 

Sitting on disk brakes from a 80s truck swap

245/40/r17 front tires 

17×8 wheel. 

Custom lengthened and balanced drive shaft. Connected to a 373 Yukon harden gears with Yukon dura slip differential. Harden chromoly axle shafts. Out to original drum brakes. “ I know I know next upgrade” 

All that is sitting on 275/45/r17 tires 

With a 17×9 wheel 

Rear suspension beltech performance coils 4 inch drop with nitrogen shocks. 

Currently no rear sway bar but have one ready for installation when I get a chance. 

Truck was hand painted by the great Keith Eccles. 

Has a oem style interior with bucket seats and frame mounted harnesses bar. 

B&M automatic floor shifter.

Truck was built with money over a few years from back to back 60 to 90 hour work weeks working emergency medical services. 

Sometimes the only way to complete a project is to work for the cost of the project before starting one this way short cuts are not taken and you actually build what you really wanted. 

You can kinda say that I have held peoples heads together and got blood on my hands to earn this truck 😂 

Not sure what it is about a old truck but there is nothing like it driving down the road !  Keep the pedal to the metal and the eye on the prize because in the end you will always win if you keep grinding away.

.⁣
.⁣
.⁣
.⁣
.⁣
#c10#c10club#c10nation#c10talk#c10trucks#chevytrucks#dinosgitdown#classictrucks#utahclassictrucks#customtrucks#dropped#c10clubutah#gm#gmc#k5blazer#lowered#obs#damnson#protouring#shortbed#silverado#squarebodynation#stance#truck#trucklife#trucknation#truckporn#trucks#trucksdaily#trucksofinstagram

Reunion Truck Show Recap

We spent the past weekend, 3/10/23- 3/11/23, in Chandler, Arizona at The Reunion Truck Show. This ‘80’s themed truck show is relatively new on the scene, in just its second year, and is put on by Ronnie Wetch from the C10 Talk podcast and his partner Sam Castronova. This show has become a mecca for builders in southwest area and there were a lot of beautiful builds on display. C/10 Club had a large presence at the show as well, with members making the trip from Washington, California, Texas, Arizona, Oregon, California, and our group from Utah. Awards were given out for best 80’s costume, and several other categories for the trucks. This is definitely a show that C/10 Club Utah will have on our calendar every year, so start planning for next year now! GOOD PEOPLE, GREAT TRUCKS, and GOOD TIMES!

Featured C/10 of the Week 2/25/23

Our featured truck of the week from Northern Utah is Sergio Salcedo’s @96sportsedan ‘69 GMC C15 named “La yema” ! 🔥🔥🔥 This truck has a 1987 TBI 350 w/ 700R4 swap. Sergio has done a lot of the work at his own shop, TSO Transmission, and has also added QA1 Motorsports front suspension (coilovers, tubular control arms), Wilwood disc brakes, and a DJM Suspension flip kit in the rear. He has also added some GSI door handles and plans to do more very soon. Well done sir! You will see this truck at C10 Nationals in SLC, Utah this summer!! 🔥🔥

Featured C/10 of the Week 2/19/2023

Our featured truck of the week from Lehi, Utah is Bridger Searle’s @radass_80 1980 C/10!! 🔥🔥 Bridger bought his truck right after high school and it had typical Chevy rust spots. He did a lot of bodywork, repainted it, and replaced all of the interior with a new seat, dash pad and door panels. This past year he replaced the motor with a crate ZZ4 350 and put a new turbo 350 transmission behind it. The great sound comes from Black Widow Neighbor Hater Mufflers @blackwidowexhaust 🔥🔥Bridger loves to cruise his truck and plans to have it out at all of our C/10 Club Utah events as well as C10 Nationals @c10nationals 🔥🔥🔥